What is LVR training?
LVR training teaches you how to rescue someone who is in contact with live low voltage electrical equipment, based on the nationally recognised unit UETDRMP018 Perform rescue from a live low voltage panel. You’ll learn to assess the hazards, find the isolation point, use LV rescue equipment to remove the casualty without becoming a second victim, and get them to a safe place for care. The unit covers live LV panels and apparatus, not overhead lines or underground cables.
Searching for the old code? UETDRRF004 Perform rescue from a live LV panel has been superseded. It was replaced by UETDRMP007, and UETDRMP018 has since replaced UETDRMP007, so UETDRMP018 is the current low voltage rescue unit.
UETDRMP018 is delivered and certified by [Safety Corp RTO name and number to be confirmed]. International Paramedic College runs the practical sessions on that RTO’s behalf in Ballina, Lismore and Byron Bay. Your Statement of Attainment for this unit is issued by [Safety Corp RTO name and number to be confirmed], not by International Paramedic College.
- Current nationally recognised low voltage rescue unit
- 1 to 2 hours of online pre-course learning
- Hands-on rescue practice with LV rescue equipment
- Requires a current HLTAID009 Provide Cardiopulmonary Resuscitation Statement of Attainment
Location
Practical sessions in Ballina, Lismore and Byron Bay. See our NSW first aid courses.
On-site group bookings: contact us
Delivery mode
Course duration
.svg)
Upcoming intake
Payment plans
Entry requirements
- A current Statement of Attainment for HLTAID009 Provide Cardiopulmonary Resuscitation. This is the prerequisite unit for UETDRMP018 Perform rescue from a live low voltage panel, so you must hold it before you start.
- Applying this unit at work may require an electrical licence or registration, and state or territory licensing conditions may apply. Confirm these before you enrol.
- Basic English language, literacy and numeracy skills to complete the online learning and knowledge questions.
- Basic computer skills and internet access for the pre-course learning.
- Photo ID to present at the practical session, and a valid USI (Unique Student Identifier).
- The physical ability to perform the rescue, move a casualty to safety and perform CPR at floor level.
What you’ll learn in this low voltage rescue course
The course follows the three stages of UETDRMP018 Perform rescue from a live low voltage panel: preparing for the rescue, carrying it out and completing it. You’ll learn how to:
- Confirm the workplace requirements for a rescue and identify the hazards and risk controls
- Identify the electricity isolation point
- Obtain and inspect rescue equipment and personal protective equipment (PPE)
- Keep a safe approach distance and protect yourself, the casualty and bystanders
- Assess the situation and activate the rescue response, including calling emergency services
- Release the casualty from contact with the live LV panel and move them to a safe location
- Assess the casualty and start CPR if they aren’t breathing normally
- Secure the incident site and control entry
- Report the incident following workplace requirements
Throughout, you’ll work to workplace procedures, WHS legislation, codes of practice and the industry standards that apply to LV rescue.
Course units
You’ll complete one unit, UETDRMP018 Perform rescue from a live low voltage panel, through online pre-course learning and a face-to-face practical session. The unit is delivered and certified by [Safety Corp RTO name and number to be confirmed].
Online Learning and Practical Session
What is this unit?
UETDRMP018 Perform rescue from a live low voltage panel covers rescue procedures from live low voltage apparatus. It does not cover overhead lines or underground cables. It is delivered and certified by [Safety Corp RTO name and number to be confirmed].
Why it matters
Electric shock from a live panel can stop a person’s heart, and a rescuer who rushes in can become a second casualty. A safe, practised rescue protects everyone.
What you’ll learn
You’ll learn to assess hazards, identify the isolation point, inspect rescue equipment and PPE, release a casualty from live apparatus, assess them, secure the site and report the incident.
How you’ll be assessed
You’ll answer online knowledge questions, then demonstrate a simulated rescue from a live LV panel at a face-to-face practical session.
Practical benefit
Once you’re competent, you’ll be able to perform a low voltage rescue and meet the LVR requirements many employers and sites set.
Delivery & assessment
Delivery format
- Online pre-course learning (1 to 2 hours): reading and knowledge questions completed before your session
- Face-to-face practical session: hands-on rescue practice and assessment with a trainer
- Sessions in Ballina, Lismore and Byron Bay
Assessment method
For UETDRMP018 Perform rescue from a live low voltage panel, you’ll be assessed through online knowledge questions and a simulated rescue from a live LV panel, set up to reflect real work conditions, where you’ll show you can:
- Identify rescue requirements, hazards and risk controls
- Locate the isolation point
- Collect and inspect rescue equipment and put on rescue PPE
- Perform the rescue and remove the casualty following workplace requirements
- Assess the casualty, secure the site and report the incident
All assessment tasks must be completed successfully to be deemed competent. Read our student information and policies before you book.
Career pathways
UETDRMP018 Perform rescue from a live low voltage panel is a safety requirement, not a job qualification. Employers and principal contractors often ask for current LVR before you work on or near live low voltage equipment. It’s relevant to:
- Electricians, electrical contractors and apprentices
- Trade assistants and safety observers working alongside electricians
- Solar and renewable energy installers
- Maintenance personnel in manufacturing, mining and construction
- WHS officers and occupational first aid officers on sites with LV equipment
Pathways into further training
After UETDRMP018 Perform rescue from a live low voltage panel, keep your CPR current and build broader emergency skills with these courses:
Certification and validity
When you successfully complete all the requirements of the course, you’ll receive a nationally recognised Statement of Attainment for UETDRMP018 Perform rescue from a live low voltage panel. The unit is delivered and certified by [Safety Corp RTO name and number to be confirmed], and that RTO issues your Statement of Attainment.
The unit itself doesn’t carry an expiry date, but many employers, principal contractors and sites expect an LVR refresher every 12 months, and some ask for it more often. Check your employer or site requirements. Your HLTAID009 CPR also needs to stay current, and the Australian Resuscitation Council recommends refreshing CPR every 12 months.
Who should take this course?
This LVR training in UETDRMP018 Perform rescue from a live low voltage panel suits anyone who works on or near live low voltage panels and equipment, including:
- Licensed electricians and electrical contractors
- Electrical apprentices
- Trade assistants and safety observers
- Solar, battery and renewables installers
- Mining, construction and manufacturing maintenance crews
- Anyone whose employer requires current LVR and CPR
Locations
UETDRMP018 Perform rescue from a live low voltage panel practical sessions are planned in Northern NSW at:
- Ballina
- Lismore
- Byron Bay
Contact us for upcoming dates or to ask about on-site training for your crew.
Pricing
Fees for UETDRMP018 Perform rescue from a live low voltage panel vary by location and are confirmed at booking.
Included costs
- Access to the online pre-course learning
- Face-to-face practical training and assessment
- Use of LV rescue kits, CPR manikins and AED training equipment
- Nationally recognised Statement of Attainment issued by [Safety Corp RTO name and number to be confirmed]
Additional student costs
- $35 non-refundable admin fee per booking
- $35 rebooking fee if you change your booking within 5 business days of the session
See what our students have to say
“The structure was straightforward and the support was there when I needed it. Workshops were practical, and I always knew what I was working toward.”
“I wanted training that felt real. The scenarios, feedback and support helped me build skills I can actually apply, especially when things get stressful.”
“What stood out was how approachable the team is. They teach in a calm, practical way and make sure you understand the ‘why’, not just the steps.”
“I learned more than skills - I learned how to think clearly under pressure. The practical training and feedback helped me feel ready for real-world situations.”
Trusted first aid provider for leading Australian brands
How the LVR training works
Complete the short online learning, attend your practical session, and get your UETDRMP018 low voltage rescue skills assessed.
Check you hold a current HLTAID009 Statement of Attainment.
HLTAID009 is the prerequisite for UETDRMP018. If yours has lapsed, book HLTAID009 Provide Cardiopulmonary Resuscitation first.
Book your session and complete the online learning.
Allow 1 to 2 hours for the pre-course reading and knowledge questions.
Attend your face-to-face practical session.
Practise and demonstrate the full live LV panel rescue with a qualified trainer in Ballina, Lismore or Byron Bay.
FAQs
Have questions about LVR training? Below you’ll find answers about prerequisites, refreshers, certification and the UETDRMP018 Perform rescue from a live low voltage panel unit.
What is LVR training?
LVR, or low voltage rescue, training teaches you how to safely rescue a person in contact with live low voltage electrical equipment and get them to safety for care. The current nationally recognised unit is UETDRMP018 Perform rescue from a live low voltage panel.
Do I need HLTAID009 before LVR training?
Yes. HLTAID009 Provide Cardiopulmonary Resuscitation is the prerequisite for UETDRMP018, so you need a current Statement of Attainment before you start.
How often do I need to renew my LVR certificate?
The UETDRMP018 unit doesn’t carry an expiry date, but many employers, principal contractors and sites expect an LVR refresher every 12 months. Check your employer or site requirements, and keep your HLTAID009 CPR current as well.
Who issues my LVR certificate?
UETDRMP018 Perform rescue from a live low voltage panel is delivered and certified by [Safety Corp RTO name and number to be confirmed]. That RTO issues your Statement of Attainment for this unit, not International Paramedic College.
Has UETDRMP018 replaced UETDRRF004?
Yes, indirectly. UETDRRF004 Perform rescue from a live LV panel was superseded by UETDRMP007, which was not listed as equivalent, and UETDRMP018 has since replaced UETDRMP007. If your LVR refresher is due, UETDRMP018 is the current unit. Check with your employer whether they still accept an older UETDRRF004 Statement of Attainment.
LVR training for electrical crews
Need your team’s UETDRMP018 LVR done together? Contact us about group sessions in Northern NSW or on-site training.
Practise the rescue before you ever need it
See how hands-on LV rescue practice prepares you to act safely when a workmate is in contact with live equipment.
Practise the Full Rescue
Run through the whole sequence, from hazard check and isolation to casualty care, with LV rescue equipment and a trainer watching.
Developed by Emergency Health Professionals
CPR and casualty care are taught by instructors with real-world backgrounds in emergency care and pre-hospital medicine.
Short Online Theory First
Do 1 to 2 hours of reading and knowledge questions online, so your session time goes into hands-on practice.
Nationally recognised LVR training
UETDRMP018 Perform rescue from a live low voltage panel is a nationally recognised unit. It is delivered and certified by [Safety Corp RTO name and number to be confirmed], with practical sessions run by International Paramedic College.
Registered Training Organisation (RTO 45284)
International Paramedic College is an ASQA-approved Registered Training Organisation (RTO 45284) that delivers nationally recognised training and qualifications in Australia.
Nationally recognised qualifications
We deliver nationally recognised qualifications and accredited training that support real employment and workplace outcomes.
Certification you can use anywhere
Upon completing training, your results lead to a recognised certification that can be used for employment, workplace compliance, and further study.
Take the next step into healthcare
Ready to move towards a career in healthcare? Secure your place and start building the skills, experience, and confidence needed to work in real clinical environments.
Unsure where to start? Download your free course guide and talk to a course advisor today
Learn from experienced emergency care trainers
Our trainers bring real pre-hospital experience to the CPR and casualty care side of every rescue scenario.
Susan Devlin
Susan Devlin is the Chief Executive Officer and Director of IPC, bringing over 20 years of experience in vocational education and training, business management and regulatory compliance. She leads IPC’s strategic direction with a focus on people, quality training and sustainable growth.
Kel Gale
Kel’s professional background spans training across the pre-hospital health care, maritime and tourism sectors, with a strong focus on providing practical, efficient, evidence-based education.
Reahanna Clark
Reahanna Clark is IPC’s Course Advisor, supporting new and continuing students as they navigate their training and career pathways in emergency health care. With over five years of RTO experience and a background in health sciences, she provides helpful guidance on course selection, enrolment, credit transfers, and RPL applications, helping students feel confident throughout their study journey.
Caroline Gey
Caroline leads IPC’s audit and compliance activities, ensuring quality training outcomes, regulatory compliance, and robust systems that support students, trainers, and industry partners.
Dave Mortimer
David is a registered paramedic with NSW Ambulance and a highly experienced trainer with over 12 years of first aid education experience. He delivers practical, engaging training across the IPC’s first aid courses and trains our Diploma of Emergency Health Care, bringing real emergency‑response insight to every class.
Dee Heffernan
Dee Heffernan is IPC’s Training and Professional Development Officer, working closely with partners to support training delivery and compliance. Drawing on her experience as a trainer and her paramedical studies, she helps partners stay informed, capable, and confident.
Cora O'Callaghan
Cora is IPC’s Training and Student Success Coordinator, supporting learners from enrolment through to course completion. Known for her solutions-focused style, she helps ensure students stay engaged, supported, and confident throughout their training journey.
Lynette Hawthorn
Lynette Hawthorn is a Training Coordinator at IPC, helping students navigate their courses and stay on track from start to finish. She is passionate about supporting learners as they develop the skills needed to make a difference in their communities.
Rebecca Wade
Rebecca Wade is a Trainer and Assessor with more than 30 years of experience across community and children’s services. Her career supporting vulnerable individuals shapes her practical, compassionate approach to first aid training.
Tony Ruttley
Tony Ruttley is a Trainer and Assessor with over 20 years of experience in sports medicine and emergency care. His background as a rugby league sports trainer brings valuable real-world insight into injury management and emergency response.
Harjot Singh Sandhu
Harjot Singh Sandhu is an experienced Trainer and Assessor with more than 13 years in disability, mental health, and community healthcare. His hands-on background helps him deliver engaging first aid training grounded in real-world scenarios.
Tamieka Huxley
Tamieka Huxley is a Trainer and Assessor delivering first aid training across the Northern NSW region. She is passionate about empowering local communities with the confidence and skills to respond effectively in emergencies.
Steve Tevelein
Steve Tevelein is a First Aid and CPR Trainer with extensive experience in emergency response and community service. As a long-time SES member, he brings practical knowledge into every training session.
Aligned with LV rescue requirements
This course follows the requirements of UETDRMP018 Perform rescue from a live low voltage panel, WHS legislation, codes of practice and current Australian Resuscitation Council guidelines for CPR.
Explore CPR and AED resources
Brush up on CPR, renewals and defibrillator use before your session.
.avif)
Get help starting your healthcare journey
If you’re exploring entry-level healthcare training, our team can guide you through enrolment, study options, and what to expect from this course.
